Open the door of a front-load washer, pull back the rubber seal, and you may find black spots, slime or a musty smell. It is one of the most common complaints we hear in San Antonio. I talked about this problem on News 4 San Antonio back in 2017, and it is still one of the top questions customers ask me today.
Why front-load washers get moldy
Front-load washers seal tightly to save water, which is great for efficiency but bad for airflow. After a wash, moisture stays trapped in the drum and in the folds of the rubber door seal (the boot). Leftover detergent and fabric softener give mold something to feed on, and our South Texas humidity does not help.
How to clean a moldy front-load washer
- Wipe the door seal. Pull back the folds of the rubber boot and wipe out any slime, lint or hair with a cloth and a mild bleach-and-water solution. Wear gloves.
- Run a cleaning cycle with bleach. With the washer empty, add a few cups of regular bleach directly into the drum and run the hottest cycle, or the “Clean Washer” or “Tub Clean” cycle if your model has one. Run an extra rinse afterward. Doing this every 3 months keeps most washers fresh.
- Clean the detergent drawer. Pull out the dispenser drawer and scrub away the buildup of soap and softener.
- Clean the drain pump filter. Many front-load washers have a small filter behind a door at the bottom front. A clogged filter leaves dirty water in the machine. See our guide: Whirlpool washer won’t drain.
Bleach safety
- Never mix bleach with vinegar, ammonia or other cleaners. It can create dangerous fumes.
- Keep the laundry room well ventilated, and keep children and pets away while you clean.
- Check your owner’s manual first. Some manufacturers recommend their own washer cleaner or a specific amount of bleach.
How to keep mold from coming back
- Leave the door open a few inches after each wash so the drum can dry out. Leave the detergent drawer open a little, too.
- Move wet clothes to the dryer right away. Do not let a wet load sit for hours.
- Use only HE detergent, and use less than you think. Too much soap leaves residue that feeds mold.
- Go easy on liquid fabric softener. It is one of the biggest causes of buildup.
- Wipe the door seal dry after the last load of the day.
When to call a technician
If the smell keeps coming back after cleaning, water is left in the drum after the cycle, or the door seal is torn or permanently stained, the washer may have a drainage problem or need a new boot seal. Those are repairs we handle every week.
San Antonio Appliance Repair, LLC has been repairing front-load washers in San Antonio and the surrounding areas since 2006. Every part we install comes with a 1-year parts warranty. Call (210) 374-5977 or book a repair online. Learn more about our washer repair service.